F. Ball System LVT Brochure - Product brochure - Page 7
01538 361 633 | f-ball.com
7
WATERPROOF SURFACE
MEMBRANES
STOPGAP
F77
STOPGAP
F78
HIGH PERFORMANCE, ONE COAT SYSTEM
FAST DRYING, ONE PART SYSTEM
Used to isolate residual construction moisture
Ready to use system – no mixing required
Used to isolate residual construction moisture
or rising damp up to 98% Relative Humidity
Can be applied direct to underfloor heating screeds
up to 95% Relative Humidity
with Relative Humidity reading up to 90%
Single coat application
Cures in approximately 3 hours
Rapid drying system for fast-track projects
No priming required with smoothing compounds
The System LVT range features two high performance,
solvent free waterproof surface membranes –
Stopgap F77 and Stopgap F78.
Both products are colour pigmented to aid coverage
uniformity – essential for making sure excess moisture
is completely controlled.
Stopgap F77 can be used to isolate residual construction
moisture and rising damp where relative humidity (RH)
values are up to 98% or where there is no effective integral
DPM. It can also be applied directly over underfloor heating
screeds where RH values do not exceed 90%. Stopgap F78
isolates residual construction moisture where RH values
are up to 95%. Cures in approximately 3 hours.
Requiring just a single coat application, Stopgap F77
is a great choice if time is of the essence. Similarly,
Stopgap F78 is a one part system requiring no mixing
and dries rapidly, from 30 minutes, allowing contractors
to get on with the job with minimum of delay.
