F. Ball Retail Product Guide - Flipbook - Page 29
REPAIR AND
FINISHING
COMPOUNDS
HIGH PERFORMANCE
SMOOTHING COMPOUNDS
Working Time at 20°C (min)
Time to Foot Traffic at 20°C
– approx (hrs/min)
Time to
Absorbent
cover with a
floorcovering or
Nonseal – approx
absorbent
(Hours)
Unfilled
TECHNICAL CHARACTERISTICS
STOPGAP
300
STOPGAP
600 (1)
STOPGAP
700
STOPGAP
1100
STOPGAP
1200
STOPGAP
1400
STOPGAP
1500
STOPGAP
1600
STOPGAP
400
REPAIR
STOPGAP
MICRO
RAPID
+
WATER
+
WATER
+
WATER
+
WATER
+
WATER
+
STOPGAP
1200
LIQUID
+
STOPGAP
1400
LIQUID
+
WATER
+
WATER
+
WATER
+
WATER
Rapid Setting
Rapid Drying
Product Features
Application
Thickness
STOPGAP
FAST-TRACK
30
10 – 15
Fast Drying
Thick Section
Flexible
Self-smoothing Fast Drying Fibre-modified
20 – 30
30min
90min
45min
6
20 – 30
3hrs
20 – 30
Compatible
Rapid Drying
High Flow
Rapid Drying Fibre-reinforced Slump Free
with calcium
Self-smoothing Self-smoothing Self-smoothing Fast Drying
Rapid Drying
sulphate floors
20 – 30
15 – 20
20 – 30
15 – 20
15 – 20
Feather Edge
Rapid Drying
10 – 15
10
2hrs
60min
90min
60min
3hrs
20 – 30min
20min
Scratch Coat
24 – 48
4
12
4
12 – 72
1½ @ 2mm
20min
Scratch Coat
60min
3
6 – 24 (1)
60min
12
Min
(mm)
2–3
2–3
5
2–3
2–3
2–3
2–3
2–3
3
2–3
Scratch Coat
Max
(mm)
10
15
75
10
10
10
10
10
40
20
1
Can be
Filled
4
No
Up to 20mm
No
No
Up to 50mm
Up to 30mm
No
Up to 30mm
No
Up to 50mm
No
Suitable for Biologically
Sensitive Areas
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Coverage m2 per unit
5.6 @ 2mm
5.0 @ 3mm
2.8 @ 5mm
4.8 @ 3mm
5.0 @ 3mm
5.0 @ 2 – 3mm
5.9 @ 2mm
5.0 @ 2 – 3mm
3.7 @ 3mm
n/a
n/a
Suitable for Pump Application
No
Yes
Yes
No
Yes
No
No
Yes
Yes
No
No
Suitable for High Temperature
areas e.g. conservatories
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Compressive Strength 28 Day
(N/mm2)
35
35
30
30
30
16
20
16
25
30
16
Flexural Strength 28 Day
(N/mm2)
10
8
7
10
7
6
6
6
6
4
6
EN 13813 Class / EN
1504-3 Class
CT-C35-F10
CT-C35-F7
CT-C30-F7
CT-C30-F10
CA-C30-F7
CT-C16-F6
CT-C20-F6
CT-C16-F6
CT-C25-F6
CT-C30-F4
CT-C16-F6
Concrete, Sand/Cement
Screeds and Other Solid
Absorbent Surfaces
Dilute P131
Dilute P131
Dilute P131
Dilute P131
or Stopgap Fill
and Prime
Dilute P121
Apply Direct or
Dilute P131 (3)
Dilute P131
Apply Direct or
Dilute P131 (3)
Dilute P131
Apply Direct to
Damp Surface Apply Direct
or Dilute P131
Non-absorbent Surfaces
e.g. Terrazzo, Ceramic Tiles
Neat P141
Neat P141
Neat P141
n/a
Neat P141
Apply Direct
Neat P141
Apply Direct
Neat P141
Neat P131 or
Neat P141
n/a
Neat P141
Apply Direct or
Dilute P131 (3)
Neat P141
Apply Direct or
Dilute P131 (3)
Neat P141
Apply Direct
n/a
n/a
n/a
P121 (6)
SUBFLOOR SUITABILITY + PRIMER RECOMMENDATION
TYPE
Power Floated Concrete
(shot blasted)
Neat P141
Neat P141
Dilute P131
n/a
Calcium Sulphate e.g.
Anhydrite Screeds
P121
Minimal Adhesive Residues
on solid base
Neat P131
Neat P131
Neat P131
n/a
Neat P131
Apply Direct
Apply Direct
Apply Direct
Neat P131
Neat P131
n/a
STOPGAP F77 (F78 see (5))
Neat P141
Neat P141
Neat P141
Neat P141
Neat P141
Apply Direct (4)
Neat P141
Apply Direct (4)
Neat P141
Neat P141
n/a
Flooring Grade Mastic Asphalt
n/a
Neat P141
n/a
n/a
Neat P141
Apply Direct
Neat P141
Apply Direct
n/a
n/a
n/a
Steel (non-flexing, corrosion
free and clean)
Neat P141
Neat P141
Neat P141
Neat P141
n/a
Apply Direct
n/a
Apply Direct
Neat P141
n/a
n/a
n/a
n/a
n/a
Dilute P131
n/a
n/a
n/a
n/a
n/a
n/a
Apply Direct
Plywood Overlays
(6)
P121
(6)
n/a
n/a
P121
THIS CHART IS FOR REFERENCE ONLY. ALWAYS REFER TO THE CURRENT
TECHNICAL DATA SHEET, SUBFLOOR PREPARATION GUIDE AND/OR OUR
TECHNICAL SERVICE DEPARTMENT FOR SPECIFIC GUIDANCE.
(1)
In certain situations priming may not be necessary, for example, when installing textile
floorcoverings. However, we would recommend priming with STOPGAP P131 diluted
to 4:1 with water to prevent uncontrolled drying of the compound, pin-holing and to aid
the flow and workability.
(2)
Within 24 hours and when not used in conjunction with Underfloor Heating.
(3)
STOPGAP F78 Waterproof Surface Membrane does not require priming
(within 12 hours of application) refer to Product Data Sheet or Technical Service.
(6)
P121
(4)
(6)
P121
(6)
P121
(6)
Please refer to the Stopgap P121 Product Data Sheet for the correct
Mixing and Application method.
n/a = not applicable or not recommended.
29
