F. Ball Product Guide AusNZ - Flipbook - Page 17
REPAIR AND
FINISHING
COMPOUNDS
SMOOTHING COMPOUNDS
STOPGAP
600 (1)
STOPGAP
1500
STOPGAP
1600
STOPGAP
400 REPAIR
STOPGAP
500 MICRO
+
WATER
+
WATER
+
WATER
+
WATER
+
WATER
+
WATER
Self-smoothing
Economy
Thick Section
Fast Drying
Fibre-reinforced
Fast Drying
Slump Free
Rapid Drying
Feather Edge
Fast Drying
(min)
15 – 25
20 – 30
15 – 20
15 – 20
10 – 15
15 – 20
Time to Foot Traffic at 20°C
– approx
(hrs/min)
3hrs
3hrs
60min
3hrs
20 – 30min
25min
Micro-Coat
6 – 24 (1)
4
12 – 72
1½ @ 2mm
25min
Micro-Coat
5
2–3
3
2–3
Micro-Coat
Product Features
Time to cover with a
floorcovering or seal
– approx (Hours)
Absorbent
24
Non-absorbent
n/a
Min (mm)
3
Unfilled
TECHNICAL CHARACTERISTICS
Working Time at 20°C
Application
Thickness
Max (mm)
Can be Filled
Suitable for Biologically Sensitive Areas
2
Coverage m per unit
Rapid Drying
Self-smoothing
10
75
10
40
20
1
Up to 15mm
No
Up to 30mm
No
Up to 50mm
No
Yes
Yes
Yes
Yes
Yes
Yes
3.8 @ 3mm
2.8 @ 5mm
5.0 @ 2 – 3mm
3.7 @ 3mm
n/a
n/a
Suitable for Pump Application
Yes
Yes
Yes
Yes
No
No
Suitable for High Temperature areas
e.g. conservatories
No
Yes
Yes
Yes
Yes
No
Compressive Strength 28 Day (N/mm2)
30
30
16
25
30
16
2
5
7
6
6
4
6
CT-C25-F5
CT-C30-F7
CT-C16-F6
CT-C25-F6
CT-C30-F4
CT-C16-F6
Flexural Strength 28 Day
(N/mm )
EN 13813 Class / EN 1504-3 Class
SUBFLOOR SUITABILITY + PRIMER RECOMMENDATION
Dilute P131
Dilute P131
Apply Direct or
Dilute P131 (3)
Dilute P131
Apply Direct to
Damp Surface or
Dilute P131
Apply Direct
Non-absorbent Surfaces
e.g. Terrazzo, Ceramic Tiles
n/a
Neat P141
Apply Direct
Neat P141
Neat P131 or
Neat P141
n/a
Power Floated Concrete (shot blasted)
n/a
Dilute P131
Apply Direct or
Dilute P131 (3)
Neat P141
Apply Direct
n/a
Minimal Adhesive Residues on solid base
n/a
Neat P131
Apply Direct
Neat P131
Neat P131
n/a
STOPGAP F77 (F78 see (5))
n/a
Neat P141
Apply Direct (4)
Neat P141
Neat P141
n/a
Steel (non-flexing, corrosion free
and clean)
n/a
Neat P141
Apply Direct
Neat P141
n/a
n/a
Plywood Overlays
n/a
n/a
n/a
n/a
n/a
Apply Direct
TYPE
Concrete, Autoclaved Aerated Concrete
and Other Solid Absorbent Surfaces
THIS CHART IS FOR REFERENCE ONLY. ALWAYS REFER TO THE CURRENT
TECHNICAL DATA SHEET, SUBFLOOR PREPARATION GUIDE AND/OR
OUR TECHNICAL SERVICE DEPARTMENT FOR SPECIFIC GUIDANCE.
(1)
STOPGAP 600 is designed to be used in conjunction with STOPGAP 1500.
Time to cover is therefore dependent on combination used.
(2)
At least 75% of the subfloor must be exposed and sound.
(3)
In certain situations priming may not be necessary, for example, when installing textile
floorcoverings. However, we would recommend priming with STOPGAP P131 diluted
to 4:1 with water to prevent uncontrolled drying of the compound, pin-holing and to
aid the flow and workability.
(4)
Within 24 hours and when not used in conjunction with Underfloor Heating.
SMOOTHING & REPAIR COMPOUNDS
STOPGAP
RED BAG
(5)
STOPGAP F78 Waterproof Surface Membrane does not require priming
(within 12 hours of application) refer to Product Data Sheet or Technical Service.
Please refer to the Stopgap P121 Product Data Sheet for the correct Mixing and
Application method.
STOPGAP 1500 has been tested in accordance with and approved for use in
marine application.
n/a = not applicable or not recommended.
(6)
17
